すべての製品
Subscribe to our Newsletter
Model No: LX294100-JP

29.4 v 1a JP プラグ付き充電器 PSE 承認済み LX294100

入力:100-240V 50/60Hz 1.6A 出力:29.4V 1A DC 最大電力:29.4W ACプラグ:JPプラグ 認証:PSE DCコード:1.2m
配達 :
EXW
最小注文 :
1000 ピース
供給能力 :
20000ピース / 日
ストッキング期間 :
20日
元の生産地 :
広東省、中国
色 :
数量 :
$3.20 - $3.60 / ピース
連絡先を送る

この 29.4 V 1A 充電器は、29.4 V バッテリー充電器またはホバーボード充電器 29.4 v を必要とするホバーボードやその他のデバイス用に設計されています。デバイスに安全で効率的な充電ソリューションを提供します。

29.4 v 1a 充電器の仕様:

29.4 V 1A 充電器は、29.4 ボルトの電圧と 1 アンペアの電流を必要とするバッテリーを充電するために特別に設計された充電デバイスの一種です。この充電器は、電動スクーター、電動自転車、その他の小型電気自動車に電力を供給するリチウムイオン電池の充電に一般的に使用されます。充電器には、充電プロセス中にバッテリーが損傷しないようにするために、過充電保護、過電流保護、短絡保護などのさまざまな安全機能が備わっています。
入力100-240V 50/60Hz 1.6A
出力29.4V 1A
最大出力29.4W
ACプラグJPプラグ
認証PSE
黒か白か
DCコード1m 1.2m 1.5m 1.8m 2m
DCジャック5.5*2.1mmまたは5.5*2.5mm
A 29.4V 1A charger is a type of charging device that is specifically designed to charge batteries that require a voltage of 29.4 volts and a current of 1 ampere. This charger is commonly used for charging lithium-ion batteries that power electric scooters, electric bicycles, and other small electric vehicles. The charger comes with various safety features, such as overcharge protection, over-current protection, and short circuit protection, to ensure that the battery is not damaged during the charging process.

29.4 v バッテリー充電器の説明:

29.4 V バッテリ充電器は、定格電圧 29.4 V のバッテリを充電するように特別に設計されたデバイスです。このようなバッテリーは、電動自転車、電動スクーター、電動スケートボード、その他の電気自動車を含むさまざまな用途で一般的に使用されています。充電器の DC 出力電圧は 29.4V で、同じ電圧定格のバッテリーと一緒に使用する必要があります。充電器には、バッテリーや充電器自体の損傷を防ぐために、過充電保護、過電流保護、短絡保護などの安全機能が装備されています。互換性のない充電器を使用するとバッテリーが損傷し、寿命が短くなる可能性があるため、お持ちの特定のバッテリーと互換性のある充電器を選択することが重要です。
  • タイプ:電気、電源アダプター、リチウム電池充電器、壁掛けタイプ
  • 用途:家庭用電化製品、電子製品
  • 材質:PC耐火材、ABS
  • 保護:短絡保護、ovp、OTP、OLP、ocp
  • 専用金型:はい
  • 機能:バッテリー充電器
  • ブランド名:ヘチョボ
  • モデル番号:LX294100
  • ポート:DC
  • 入力電圧と電流:100-240V/1.6A
  • 出力電圧と電流:29.4V 1A
  • 出力電力: 29.4W
  • 原産地:中国広東省
  • 入力電圧:90-265V
  • 出力電圧:DC29.4V
  • 出力電流:1000mA
  • 保証期間:2年
  • 色:ブラックホワイト
  • 証明書:PSE
  • ACプラグ:JPプラグ
  • 寸法:L75.5*W43.5*H49.5mm
  • A 29.4V battery charger is a device that is specifically designed to charge batteries with a voltage rating of 29.4V. Such batteries are commonly used in a variety of applications, including electric bikes, electric scooters, electric skateboards, and other electric vehicles. The charger has a DC output voltage of 29.4V and should be used with batteries that have the same voltage rating. The charger is equipped with safety features such as overcharge protection, over-current protection, and short-circuit protection, to prevent damage to the battery or the charger itself. It is important to choose a charger that is compatible with the specific battery that you have, as using an incompatible charger can damage the battery and reduce its lifespan.
  • ホバーボード充電器 29.4 v のカスタマイズ プロセス:

  • 定格 29.4V のホバーボード充電器は、ホバーボードで一般的に見られるリチウムイオン電池を充電するように設計されたデバイスです。充電器の DC 出力電圧は 29.4 V で、同じ電圧定格のバッテリーを搭載したホバーボードと互換性があります。通常、電源コンセントに接続するために使用できる標準の 3 極 AC プラグが付属しています。通常、充電器には充電の進行状況を示す LED ライトが装備されており、緑色のライトはバッテリーが完全に充電されていることを示し、赤色のライトはバッテリーがまだ充電中であることを示します。バッテリーとホバーボード自体の損傷を防ぐために、適切な定格電圧のホバーボード充電器を使用することが重要です。
  • A li-ion battery charger that is designed to charge lithium-ion batteries with a nominal voltage of 29.4V. This charger provides a reliable, safe, and effective charging solution for high-capacity batteries used in various applications such as electric bikes, scooters, drones, and more.